Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of NORYL GTX™ Resin GTX910 - Europe - (PPE+PA*) - Saudi Basic Industries Corporation (SABIC)

Material Data Center offers the following functions for NORYL GTX™ Resin GTX910 - Europe:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Noryl GTX datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Caracteristicas de procesamiento y fisicas - Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Recomendación para procesamiento Moldeo por inyección
Any use of this information falls under the rules of our disclaimer.
Texto del producto
NORYL GTX™ 910 resin is non-reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). NORYL GTX910 resin exhibits excellent chemical resistance and is an excellent candidate for automotive applications such as plastic/metal hybrid components, rail extensions, crash cans, wheel covers, and energy absorbers.
Caracteristicas de procesamiento y fisicasValorUnidadesMétodo de ensayo
ISO Data
Indice de fluidez volumétrico, MVR 10 cm³/10min ISO 1133
Temperatura 280 °C -
Carga 5 kg -
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 2200 MPa ISO 527
Esfuerzo de fluencia 55 MPa ISO 527
Alarg. en límite elástico 8 % ISO 527
Resistencia a la tracción 50 MPa ISO 527
Alargamiento a rotura 25 % ISO 527
Modulo de Flexión 1900 MPa ISO 178
Resistencia al impacto Charpy c/entalla, +23°C 25 kJ/m² ISO 179/1eA
Resistencia al impacto Charpy c/entalla, -30°C 12 kJ/m² ISO 179/1eA
Res. impacto Izod c/entalla, +23°C, 4mm 25 kJ/m² ISO 180/1A
Res. impacto Izod c/entalla, -30°C, 4mm 12 kJ/m² ISO 180/1A
Ball indentation hardness 115 MPa ISO 2039-1
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temp. reblandecimiento Vicat, A 238 °C ISO 306
Temp. reblandecimiento Vicat, B 195 °C ISO 306
Temp. reblandecimiento Vicat, 120°C/h 50N 195 °C ISO 306
Coef.de expansión térmica lineal, paralelo 90 E-6/K ISO 11359-1/-2
Coef.de expansión térmica lineal, normal 90 E-6/K ISO 11359-1/-2
Conductibilidad termica 0.23 W/(m K) DIN 52616
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 3.5 % Sim. to ISO 62
Absorción de humedad 1 % Sim. to ISO 62
Densidad 1100 kg/m³ ISO 1183
Recomendación para procesamiento Moldeo por inyecciónValorUnidadesMétodo de ensayo
Temperatura de pre-secado 100 - 120 °C -
Tiempo de pre-secado 2 - 3 h -
Humedad de procesamiento ≤0.07 % -
Temperatura de la masa 280 - 310 °C -
Temperatura del molde 80 - 120 °C -
Temperatura - zona de alimentación 60 - 80 °C -
Zona 1 260 - 280 °C -
Zona 2 270 - 290 °C -
Zona 3 280 - 300 °C -
Características
Procesamiento y forma de entrega
Moldeo por inyección
Applicaciones
Automotriz
Disponibilidad regional
Europa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.